Samsung fx2490 Manuel D’Utilisation

3-4

Using the Product

Eco Solution

•

<No Signal Power Off>
Saves power by turning the TV off when no signal is received from any source.
•

<Off> - <15 min.> - <30 min.> - <60 min.>

Disabled when the PC is on DPM(Display Power Management).

 

Auto Adjustment 

The values of <Fine>, <Coarse> and <Position> are adjusted automatically.

By changing the resolution in the control panel, auto function is performed.

Available only <PC> mode.

 

 Press the [TOOLS] button to display the Tools menu. You can also set the <Auto Adjustment> by 

selecting <Tools> → <Auto Adjustment>.

Screen •

<Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using 
the horizontal control menu.

•

<Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency <Coarse>.

•

<Position>
Adjusts the screen location horizontally and vertically.

•

<Image Reset>
Image parameters are replaced with the factory default values.

Available only <PC> mode.

 

Picture Options

•

<Color Tone>
The tone of the color can be changed.
•

<Cool> - <Normal> - <Warm> - <Custom>

•

Available only <PC> mode.

•

Not available when <MagicBright> is <Dynamic Contrast>.

 

•

<R-Gain > - < G-Gain > - <B-Gain >
Adjusts the individual R, G, B (Red, Green, Blue) color controls.

Not available when <MagicBright> is <Dynamic Contrast>.

 

•

<Size>
 You can switch the Size.
•

<16:9> - <4:3>

•

<Auto Protection Time>
Set the time the screen remains idle with a still image until the screen saver is activated. The 
screen saver prevents the formation of ghost images on the screen.
•

<2 hours> - <4 hours> - <8 hours> - <10 hours> - <Off>

Picture Reset 

Picture parameters are replaced with the factory default values.

•

<OK>  -  <Cancel>