Samsung cw29z308 Mode D'Emploi

English - 9

Plug & Play Feature 

(depending on the model)

When the television is initially powered on, three basic customer settings proceed 

automatically and subsequently: setting the language, channel and clock.

If the television is in Standby mode, press the 

POWER button on the 

remote control. 

The message Start Plug & Play is displayed.

The Language menu will automatically appear after several seconds.

Select the appropriate language by pressing the 

▲ or ▼ button. 

Press the 

ENTER (

) button to enter the language. 

The message Check antenna input. is displayed.

➢

  If any language is not selected on the Language menu, the Language 

menu will disappear about 30 seconds later.

Make sure that the antenna is connected to the TV. 

Press the 

ENTER (

) button. 

The Auto Store menu is displayed.

Select your country by pressing the 

▲ or ▼ button, then press the ENTER 

(

) button. 

The Search menu is displayed.

Press the 

ENTER (

) button to start search the channels.  

The channel search will start and end automatically. After all the available 

channels are stored, the Clock Set menu appears.

➢

  Refer to “Storing Channels Automatically” on page 11.

Press the 

◄ or ► button to move to the hour or minute.  

Set the hour or minute by pressing the 

▲ or ▼ button.

➢

  ◆  Refer to “Setting and Displaying the Current Time” on page 24.

 

◆

  You can set the hour and minute directly by pressing the numeric 

buttons on the remote control.

When you have finished, press the 

MENU ( ) button. 

The message Enjoy your viewing is displayed, and then the channel 

which has been stored will be activated.

Press the 

MENU ( ) button to display the menu.

Press the 

▲ or ▼ button to select Setup, and then press the ENTER 

( 

 ) button. 

The Plug & Play is selected.

Press the 

ENTER (

) button again. 

This feature starts with the message Start Plug & Play displayed.

AA68-03784A-X0Eng_UK_VE.indd   9

2006-05-26   ｿﾀﾀ・9:29:15