Samsung dw28a20 Mode D'Emploi
English - 42
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual-I ” or “Stereo”, depending on
the current transmission.
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the Mono.
◆ If the stereo signal is weak and an automatic switching
occurs, then switch to the Mono.
◆ When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the panel (front or
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
side). If the mono sound comes out only from left
speaker, press the DUAL I-II button.
Selecting the Sound Mode
(depending on the model)
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
Bilingual or Dual-I/II
Stereo
On-screen indication
Mono (Normal use)
Mono
↔ Mono
NICAM
(Normal)
Stereo
↔ Mono
NICAM
(Normal)
Mono (Normal use)
DUAL-I
↔ DUAL-II
Stereo
↔ Mono
(Forced mono)
Dual-I
→ Dual-II → Mono
NICAM
NICAM
(Normal)
NICAM
Stereo
A2
Stereo
→
→
AA68-03476A-00Eng_AUS 6/20/04 1:59 PM Page 42