Samsung dw28a20 Mode D'Emploi
English - 8
To view television channels correctly, a signal must be received by
the set from one of the following sources:
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
◆ A satellite network
◆ A cable television network
◆ A satellite network
1
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
the 75Ω coaxial socket on the rear of the television.
2
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
tuning your television until you obtain a picture that is both sharp
and clear.
For further details, refer to:
◆ (Digital TV) “Storing Channels Automatically” on page 13
◆ (Analog TV) “Storing Channels Automatically” on page 28
◆ (Analog TV) “Storing Channels Manually” on page 30
Rear of the TV
Cable Television
Network
or
Connecting to an Aerial or Cable Television Network
AA68-03476A-00Eng_AUS 6/20/04 1:59 PM Page 8