Polycom IP 300 Note De Mise

Page de 31
Release Notes - SIP Application 
 
Changes 
Page 2 
Copyright © 2006 Polycom, Inc. 
 
• 16075: Phone plays re-order tone when taking call off hold in specific scenario 
• 16100: BLA line key status is not maintained in specific scenario 
• 16116: Cannot register lines 7 to 12 from SIP configuration menu 
• 16149: Line key LEDs for BLA lines can switch from one line key to another in 
specific scenario 
• 16250: Comfort noise received by phone is handled incorrectly 
• 16374: 
Phone keeps sending NOTIFY if 481 received in early NOTIFY 
• 16388: Removed DC bias from Tx signal 
• 16429: Web interface does not have configuration options for lines 7 to 12 
• 16459: Phone is unable to park a call that is received via ACD final destination 
• 16480: BLA Led gets stuck and there is a phantom NOTIFY from the phone in a 
particular scenario. 
• 16485: 
Notify Talk is ignored if interval between it and 180 is too brief 
• 16565: Dialed digits can be lost if they are dialed too quickly after selecting an 
SCA line 
• 16599: SoundPoint IP 300 and 301 phones reboot when using G.729 codec in a 
conference call with SIP 1.6.6 C software 
• 16660: Failover to backup SIP server does not occur when hostname of 
primary cannot be resolved via DNS 
• 16691: Dialog does not get removed after its expiration time in some 
scenarios. This addresses #16374 and #16480. 
• 16813: Going on and off hook repeatedly on a shared line may result in the line 
showing an active call state when the handset is physically on-hook 
• 16915: 
Phone sends SIP requests to port 5060 regardless of 
voIpProt.SIP.outboundProxy.port configuration setting 
• 17014: 
When a shared line call is on hold, using on-hook dialing seizes the last 
used line instead of the first available line 
• 17284: An unnecessary ACK is sent by the phone if no reply is received within 
32 seconds 
2.1.4  Configuration File Parameter Changes 
.cfg 
File 
Action Parameter 
Description 
sip added  voIpProt.SDP.answer.useLocalPreferences 
Can be 0 or 1. Use this new parameter to 
have the phone use its own preference 
list when deciding which codec to use 
rather than the preference list in the offer. 
Null default = 0 = disabled.