Samsung 400uxn-ud 400uxn-ud2 Mode D'Emploi

→

, → [0~9]

• ID Setup

Assigns distinctive IDs to the SET.

• ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID

corresponds to the transmitter setting becomes activated.

MagicInfo

Available Modes

•

PC / DVI

•

Component

•

HDMI

•

MagicInfo

Note

• The remote control can be used to select MagicInfo. However, it is recommended to use

a separate USB keyboard to utilize MagicInfo fully.

• For MagicInfo in Device mode, moving external devices while booting may cause errors.

Set up external devices only if the LCD Display turns on.

• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the

program (MagicInfo) may stop. If you do unplug the cable, restart the system.

• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the

program (MagicInfo) may stop.

• To access other sources, press the SOURCE button in MagicInfo.

• The preset password for the LCD Display is "000000".

• The server program's Power-On option works only if the LCD Display's power is com-

pletely shut off.

Please make sure not to use the Power-On option when the LCD Display is in the process

of shutting down since this may cause system errors on the LCD Display.

Adjusting the LCD Display