GVision p10ps-j Mode D'Emploi
Power LED Display & Power Saving
General Power Saving Mode
When the power switch are switch on, this LED lights in green.
The LED indicates the different power status with altered LED colors when monitor operates
in different modes (see following table).
in different modes (see following table).
Mode
Power LED Color
Power Consumption
H. / V. Sync.
On
Green 16W ＋ / ＋
Standby
Orange
＜7W
－ / ＋
Suspend
Orange
＜7W
＋ / －
Off
Orange
＜7W
－ / －
We recommend to switch off the monitor when it is not use for quite a long time.
Troubleshooting
The monitor does not respond after you turn on the system.
Check if the Power Switch of monitor is turned on.
Turn off the power and check the monitor’s power cord and signal cable for proper
connection.
connection.
The characters on the screen are dim.
Refer to the Controls and Adjustments section to adjust the brightness.
The screen is blank.
During operation, the monitor screen may automatically turn off as a result of Power
Saving feature. Press any key to see if the screen comes back.
Saving feature. Press any key to see if the screen comes back.
Refer to the Controls and Adjustments section to adjust the brightness.
The screen flashes when it’s initialized.
Turn off the monitor and turn it on again.
11