GVision p12as-l Mode D'Emploi

3.  Menu/Select ▲    Pressing this button pops up the OSD menus on the screen, and used to 

select  (“Up” direction) the OSD control options on the screen. 

4.  Menu/Select ▼    Pressing this button pops up the OSD menus on the screen, and used to 

select  (“Down” direction) the OSD control options on the screen. 

5. 

+    This button is used to increase the value of the selected OSD control option. 

6. 

−    (1) This button is used to adjust the decreasing value of the selected OSD control 
option. (2) used to select input sources (VGA or Video signal) when the OSD “main 
menu” function is off (for model with video-in function only).  

7.  MSR (Magnetic Strip Reader) Holder  (optional module) 
 
Setting Up 

WARNING     When you disconnect the cord/cables, be sure to hold the connector instead 
of the wire part. 

 
Touch Screen Model: 

 

Analog/Video-in Model: 

 

1.  Connect one end of the power adapter to the monitor and the other end to the connector 

of the power cord. ( ) 

2.  Connect one end of the signal cable to the rear side of computer and the other to the LCD 

monitor. Tighten by turning clockwise the two thumb screws to ensure proper grounding. 
( ) 

3.  Connect one end of the touch (RS232) cable to the rear side of computer and the other to 

the LCD monitor. Tighten by turning clockwise the two thumb screws to ensure proper 
grounding. ( ) (optional module)