GVision p12as-l Mode D'Emploi
HORIZONTAL
Pressing
+ moves the display image to the right; Pressing − moves the display image to the
left.
VERTICAL
Pressing
+
moves the display image upward; Pressing
−
moves the display image
downward.
CENTER
Pressing + or – buttons to automatically centers and sizes the screen image.
LANGUAGE
This item is used to select OSD languages: English, Chinese, and Japanese.
RECALL
Pressing + or – buttons to recall factory preset values.
SAVE EXIT
Pressing + or – buttons to save previous preset values.
Troubleshooting
The monitor does not respond after you turn on the system.
Check if the Power Switch of monitor is turned on.
Turn off the power and check the monitor’s power cord and signal cable for proper
connection.
connection.
The characters on the screen are dim.
Refer to the Controls and Adjustments section to adjust the brightness.
The screen is blank.
During operation, the monitor screen may automatically turn off as a result of Power
Saving feature. Press any key to see if the screen comes back.
Saving feature. Press any key to see if the screen comes back.
Refer to the Controls and Adjustments section to adjust the brightness.
The screen flashes when it’s initialized.
Turn off the monitor and turn it on again.
7