Infocus LP260 Guide De Spécification
To assure the projector can process a command, wait 3 seconds before entering the next command.
Write Command Examples
Function
Command
Response
Brightness
(BRT10)
Sets the brightness
to 10
to 10
Freeze
(FRZ1) or
(FRZ8888)
(FRZ8888)
Freezes the display
Power
(PWR0)
Turns power off
Power
(PWR1)
Turns power on
Error Conditions
Not all commands are supported for all projectors. If an unsupported command is issued, the command will be ignored. If a
command is received that is not understood, a ‘?’ character will be returned indicating the command was not understood.
command is received that is not understood, a ‘?’ character will be returned indicating the command was not understood.
Limitations
The CLI cannot respond to commands coming in at a high-rate. Therefore, a delay must occur between commands to ensure that
the command gets properly executed. To assure the projector can process a command, wait 3 seconds before entering the next
command.
the command gets properly executed. To assure the projector can process a command, wait 3 seconds before entering the next
command.