Infocus lp425 Manuel De Montage
Installation Instructions
SP-CEIL- LM-425
Step 1
Invert the projector and place it on a flat surface. Loosely install the two ( 2 ) quick release sleeves in to the mounting
holes found on the bottom of the projector using the two ( 2 ) 4mmx16mm knurl knobs ( supplied ). Align the keyholes in the
mounting bracket to the quick release sleeves and lower it to sit on the sleeves. Slide the bracket to the back of the projector
until the knurl knob hole lines up with the mounting hole on the bracket. Secure using the 4mmx8mm knurl knob. (Supplied)
( Do not over tighten! ).
holes found on the bottom of the projector using the two ( 2 ) 4mmx16mm knurl knobs ( supplied ). Align the keyholes in the
mounting bracket to the quick release sleeves and lower it to sit on the sleeves. Slide the bracket to the back of the projector
until the knurl knob hole lines up with the mounting hole on the bracket. Secure using the 4mmx8mm knurl knob. (Supplied)
( Do not over tighten! ).
Step 2
Install the base box securely to the ceiling structure in accordance with proper commercial standards.
Use ( commercially available ) suitable hardware depending on the installation requirements.
Use ( commercially available ) suitable hardware depending on the installation requirements.
NOTE: If (Optional) AST-2446 adjustable height suspension adapter is a part of the installation, securely install
the adapter to the ceiling at this time. ( Refer to its installation instructions. )
27700B S.W. Parkway Ave.
Wilsonville, Oregon 97070-9215
Phone 1-800-294-6400 Fax 1-503-685-888
www.infocus.com