Infocus lp760 Manuel D’Utilisation
Connecting the LitePro 760
LitePro 760 User’s Guide
13
Connecting an IBM-Compatible Laptop Computer or SPARCbook
Follow this procedure if your computer is an IBM-compatible laptop
or Tadpole SPARCBook.
or Tadpole SPARCBook.
1. Attach the “Computer” end of the LitePro cable to the graphics
connector on the computer.
2. Tighten the thumb screws on the connectors to ensure proper
grounding.
3. Turn on the LitePro 760 by pressing the “1” side of the power
switch. (Refer to “Powering Up the LitePro” on page 15.)
4. Turn on the computer.
Many laptop computers automatically turn off their monitor when
another display device is connected. If you want to use the laptop’s
monitor and the LitePro at the same time, you may have to re-activate
your monitor. Refer to your computer’s documentation for
instructions. The Appendix of this manual lists monitor re-activation
commands for some IBM-compatible laptop computers.
another display device is connected. If you want to use the laptop’s
monitor and the LitePro at the same time, you may have to re-activate
your monitor. Refer to your computer’s documentation for
instructions. The Appendix of this manual lists monitor re-activation
commands for some IBM-compatible laptop computers.
Osprey.bk Page 13 Monday, December 11, 2000 1:38 PM