Infocus sp777 Manuel D’Utilisation
9
Using the remote control
The remote uses two (2) provided AAA batteries. They are easily installed
by sliding the cover off the remote’s back, aligning the + and - ends of the
batteries, sliding them into place, and then replacing the cover.
by sliding the cover off the remote’s back, aligning the + and - ends of the
batteries, sliding them into place, and then replacing the cover.
To operate, point the remote at the projection screen or at the projector (not
at the video device or computer). The range of optimum operation is up to
30 feet (9.14m).
at the video device or computer). The range of optimum operation is up to
30 feet (9.14m).
Press the remote’s Menu button to open the projector’s menu system. Use
the arrow buttons to navigate, and the Select button to select features and
adjust values in the menus. See page 11 for more info on the menus.
the arrow buttons to navigate, and the Select button to select features and
adjust values in the menus. See page 11 for more info on the menus.
The remote also has:
•
Power
button to turn the projector on and off (see page 8 for shutdown
info)
•
backlight button to light the remote’s buttons in the dark
•
Brightness
and Contrast buttons to adjust the image
•
Blank
button to display a blank screen instead of the current image (to
change the color of the blank screen, see page 17)
•
Source
buttons to switch among sources (to assign a particular source
to a source button, see page 16) and a source toggle
•
Resize
button to change the Aspect Ratio (see page 12)
•
Auto Image
button to resynchronize the projector to the source
•
Preset
button to restore stored settings (see page 13)
•
Overscan
button to remove noise in a video image (page 13)
Adjusting power zoom lens
You can adjust the lens using the Up and Down navigation buttons on the
remote (only when the menus aren’t open). The Lens Control Enable option
in the System menu must be turned on to do this (on by default, see
page 17).
remote (only when the menus aren’t open). The Lens Control Enable option
in the System menu must be turned on to do this (on by default, see
page 17).
When you power on the projector, the buttons are mapped to adjust focus.
Press the Select button to scroll through other available functions: zoom,
Press the Select button to scroll through other available functions: zoom,
vertical lens shift, horizontal lens shift, and back to focus, then use the Up
and Down buttons to make adjustments. The name of the currently selected
function appears on the projection screen.
and Down buttons to make adjustments. The name of the currently selected
function appears on the projection screen.
Troubleshooting the remote
•
Make sure the batteries are installed in the proper orientation and are
not dead.
not dead.
•
Make sure you’re pointing the remote at the projector or the screen, not
at the video device or the computer, and are within the remote range of
30 feet (9.14m).
at the video device or the computer, and are within the remote range of
30 feet (9.14m).
backlight button
navigation buttons