Nady sm-120 Guide De Spécification

Congratulations for your purchase of the SM-120 — you have just purchased one

of the finest studio monitor speakers on the market today. The SM-120 was

developed using the expertise of professional sound engineers and working

musicians. You will find your new NADY AUDIO speaker has superior performance

and greater flexibility than any other speaker in its price range.

We recommend that you read this instruction sheet carefully to get the most out of

your new unit. Thanks for selecting NADY AUDIO and the SM-120 as your choice

in studio monitor speakers.

• SM-120: Passive nearfield monitor with 120W peak power rating

(60W RMS)

• 8

Ω

impedance

• Clear, transparent sound and full linear frequency response

(35Hz—20KHz) for perfectly balanced mixes that translate accurately to
any other system

• Vertically aligned 2-way nearfield monitor with 6.5” woofer and 1” Ferro

fluid-cooled soft dome shielded tweeter—both magnetically shielded for
non-interfering operation near video monitors

• Bass-reflex loaded with 2” tuned cylindrical port for optimized linear

bass response 

• Curved front baffle for reduced HF diffraction effects and excellent

imaging not possible with conventional square-edged baffles

• Heavy-duty cabinet construction, with 1.5” thick front baffle, offers

increased structural integrity and stiffness for clean and articulate
performance even at high SPL levels

• Gold plated binding posts for easy hookup to banana plugs, spade

connectors, or bare wires

• Dimension and weight: 13.4”x 8.3”x10.4” (34 cm x 21.1 cm x 26.4 cm),

14.4 lbs (5.37 Kg)

• Read all instructions before using the product.

• This product may be capable of producing sound levels that could cause

permanent hearing loss.  Do not operate for a long period of time at a high
volume level or at a level that is uncomfortable.  If you experience any
hearing loss or ringing in the ears, you should consult an audiologist.

• To avoid damage to the drivers, never overload the speaker.

• To avoid the risk of fire, do not ever expose the speaker to a source of

naked flames. Also, it should be located away from heat sources such as
radiators, heat vents, or other devices (including amplifiers) that produce
heat.

• The product should be positioned so that proper ventilation is maintained.

• This speaker is designed for indoor use only. Do not expose to weather or

high humidity, rain, etc. 

• Care should be taken so that objects do not fall into, and liquids are not

spilled through, the enclosure’s openings. Do not place containers of liquids
on the speaker.

• Don’t place any heavy appliance or object (>130lbs/60kg) on the speaker

enclosure. 

• This unit is to be installed by qualified personnel only.

• This speaker is only to be used with power amplifiers complying with the

safety requirement of EN or IEC60065. 

• The maximum input peak voltage to this speaker should always be less

than 30V.

• This product should be serviced by qualified service personnel if:

A. Objects have fallen into, or liquid has been spilled onto the product.

B. The product has been exposed to rain. 

C. The product does not appear to operate normally or exhibits 

a marked change in performance.

D. The product has been dropped, or the enclosure damaged.

• Do not attempt to service this unit.  All servicing should be referred to

qualified service personnel.

When using this speaker, basic precautions should always be taken, including the following: