Nady ssw-15a Mode D’Emploi
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411
or e-mail at service@nady.com.
or e-mail at service@nady.com.
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased
this product.
this product.
S E R V I C E
FOR YOUR NADY AUDIO PRODUCT
NADY SYSTEMS, INC. •
6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
O P E R A T I O N
TECHNICAL DATA
CAUTION — REAR PANEL GETS VERY HOT!
(1) POWER ON/OFF SWITCH
(2) AC POWER CORD IEC CONNECTOR
w/ internal fuse holder
Connects to the AC power cable.
w/ internal fuse holder
Connects to the AC power cable.
(3) POWER LED
(4) SUBWOOFER LEVEL
This controls the volume of the internal subwoofer.
This controls the volume of the internal subwoofer.
(5) RIGHT / LEFT CHANNEL LEVEL CONTROLS
Separate volume controls for the Left and Right
Speaker Outputs
Separate volume controls for the Left and Right
Speaker Outputs
(6) RIGHT / LEFT LINE INPUTS
Balanced 1/4” TRS line level inputs.
Balanced 1/4” TRS line level inputs.
(7) RIGHT / LEFT LINE OUTPUTS
Balanced 1/4” TRS line level outputs in parallel
with the inputs. These outputs are not affected by
the level controls.
Balanced 1/4” TRS line level outputs in parallel
with the inputs. These outputs are not affected by
the level controls.
(8) RIGHT / LEFT SPEAKER OUTPUTS
Full-range left and right speaker outputs utilizing
2-pole Speakon ™ connectors. These should be
connected to speaker cabinets having a minimum
total impedance of 4
Full-range left and right speaker outputs utilizing
2-pole Speakon ™ connectors. These should be
connected to speaker cabinets having a minimum
total impedance of 4
Ω
per side.
(9) VOLTAGE SELECTOR SWITCH
For selecting the proper voltage (115/230VAC) to
match the power supply in your area.
For selecting the proper voltage (115/230VAC) to
match the power supply in your area.
AC220V/50,60Hz
(1)
(5)
(8)
(4)
(7)
(6)
(6)
(5)
(7)
(8)
(2)
(3)
1. AVOID CONTACT WITH SKIN.
2. KEEP PANEL AWAY FROM FLAMMABLE OBJECTS.
3. FOR MAXIMUM COOLING, VENTILLATION, AND EFFICIENCY, DO NOT POSITION SUBWOOFER REAR PANEL AGAINST WALLS OR OTHER OBJECTS.
2. KEEP PANEL AWAY FROM FLAMMABLE OBJECTS.
3. FOR MAXIMUM COOLING, VENTILLATION, AND EFFICIENCY, DO NOT POSITION SUBWOOFER REAR PANEL AGAINST WALLS OR OTHER OBJECTS.
S P E C I F I C A T I O N S
Internal Subwoofer
Power (internal speaker) ..............300W RMS @ 4
Power (internal speaker) ..............300W RMS @ 4
Ω
Frequency Response ....................20Hz - 120Hz (-3dB) 180Hz (-6dB)
Subwoofer Sensitivity
(1 watt @ 1 meter) ......................98dB
Subwoofer Maximum SPL ............110dB
Subwoofer Sensitivity
(1 watt @ 1 meter) ......................98dB
Subwoofer Maximum SPL ............110dB
Left & Right Speaker Outputs
Power (speaker outputs) ..............160W @ 4
Power (speaker outputs) ..............160W @ 4
Ω
per side
Frequency Response ....................30Hz - 20KHz
Input Impedance............................20K
Ω
Maximum Input Level ....................2V RMS
Power Requirements ....................115 VAC 60Hz, 230 VAC 50Hz
Fuse Requirements ......................5x20mm glass tube, fast blow 10A @ 115VAC,
Power Requirements ....................115 VAC 60Hz, 230 VAC 50Hz
Fuse Requirements ......................5x20mm glass tube, fast blow 10A @ 115VAC,
5A @ 230VAC
Dimensions (H X W X D) ..............20.4”x 21.8”x 19.9” (518 x 554 x 505mm)
Weight............................................100 lbs (45.4kg)
Weight............................................100 lbs (45.4kg)
(9)