Olympus fe-4000 Mode D'Emploi

EN

E

 SETUP 

X MEMORY FORMAT/FORMAT

  Before formatting, check that no important 

data is left in the internal memory or card.

  Non-Olympus cards and cards that have 

been formatted by a computer must be 
formatted with this camera before use.

YES

Completely erases the image data 
in the internal memory

*1

 or card 

(including protected images).

NO

Cancels formatting.

*1 

Be sure to remove the card before formatting the 
internal memory.

E

 SETUP 

X BACKUP

YES

Backs up image data in the 
internal memory to the card.

NO

Cancels the backup.

  It takes some time to back up data. Check 

that the battery has suffi cient power before 
starting the backup.

Changing the  display language [W]

E

 SETUP 

X W

  “Changing the display language” (p. 13)

Languages

*1

The language for the menus and 
error messages displayed on the 
monitor is selected.

*1

  The available languages vary depending on the 

country and/or region where the camera was 
purchased.

E

 SETUP 

X PIXEL MAPPING

  This function has already been adjusted 

at factory shipping, and no adjustment is 
needed right after purchase. Approximately 
once a year is recommended.

  For best results, wait at least one minute 

after taking or viewing pictures before 
performing pixel mapping. If the camera is 
turned off during pixel mapping, be sure to 
perform it again.

Press the B button when [START] 
(Submenu 2) is displayed.

The camera checks and adjusts the CCD and the 
image processing function at the same time.

Menus for Other Camera Settings