Olympus 1050 sw Mode D'Emploi

EN

Using the LED illuminator

In a dark location, the LED illuminator can 
be used as an auxiliary light to see things or 
compose shots.

Y button down 

If you perform an operation when the LED 
illuminator is on, it will illuminate up to approx. 90 
seconds.

LED illuminator

  The LED illuminator turns off if no operation 

is performed for approx. 30 seconds.

  Even when the camera’s power is turned 

off, if the lens barrier is opened, the LED 
illuminator lights for 30 seconds. 

To turn the LED illuminator off
Press and hold the 

Y button down, until the 

LED illuminator turns off.

Changing the shooting 

information display

The display of the screen information can be 
changed to best match the situation, such as 
for the need of clear view of the screen or for 
making a precise composition by using the grid 
display.

g button.

The displayed shooting information changes in 
the order shown below each time the button is 
pressed. “Shooting mode display” (p. 8)

10

M

10

M

44

10

M

10

M

44

10

M

10

M

44

Normal

No information

Histogram

Grid

If the peak fi lls too much of the frame, 
the image will appear mostly white.

If the peak fi lls too 
much of the frame, 
the image will 
appear mostly black.

The green section shows
the luminance distribution in the 
center area of the monitor.

book_oima_myu1050SW_en.indb   23

book_oima_myu1050SW_en.indb   23

2008/07/10   11:49:01

2008/07/10   11:49:01