ENCORE enh905-nwy Mode D'Emploi
10
3.1.2 Installing Network Cables
After placing the switch on the desktop, then we need to know how to connect
the device to network.
3.1.2.1 Station Connections with Twisted-Pair Cable
Connect each station to the switch by a twisted-pair straight cable
(10BASE-T or 100BASE-T cables). Plug one RJ-45 connector into a
rear-panel port of the switch, and plug the other RJ-45 connector into
the station’s network adapter.
the station’s network adapter.
3.1.2.2 Switch to Switch Connections with Twisted-Pair Cable
In making a switch to switch connection, you could use any port to connect
another switch with straight or cross-over cable. As all the ports support auto
MDI / MDI-X function, so the connection is independent of cable type and
using a straight cable to make a switch to switch connection is allowed.
another switch with straight or cross-over cable. As all the ports support auto
MDI / MDI-X function, so the connection is independent of cable type and
using a straight cable to make a switch to switch connection is allowed.