Greenlee 851 Mode D'Emploi

6

4455 Boeing Dr., Rockford, IL 61109-2988   815/397-7070

See the Exploded View. Remove the handle from the
inside of the PVC heater and attach it to the cover.

When bending 2"or larger conduit, Greenlee recom-
mends using 859-series PVC plugs. Install one plug in
each end of the conduit and tighten the wing nut until
the conduit is sealed. Remove the plugs after the PVC
has cooled.

1.

Place the heater on a firm, flat surface.

2.

Plug the cord in. Turn the heater ON. The pilot light
will illuminate.

3.

Place the conduit on the rollers and close the cover.
Rotate the conduit by hand.

4.

Check the PVC by lifting it at one end. When the
PVC is flexible, open the cover and remove the
conduit.

5.

Place the PVC on a flat surface. Form the bend by
hand. Allow the PVC to cool or set the bend by
applying cool water with a sponge or rag.

Power ........................................................................... 120 Volts, 20 Amps, 60 Hz

Capacity:

Conduit Diameter .......................................................... 1/2" – 4" PVC Conduit

Conduit Length ............................................................................ 137 cm (54")

Dimensions .......................................... 22 cm x 30 cm x 137 cm (8.5" x 12" x 54")

Mass/Weight .................................................................................... 24 kg (53 lbs.)