Furuno GP-1650W Instruction De Maintenance

Page de 96
 3-1
3. TRACK
3.1 Displaying 
Track 
1.  Press the [MENU] key to open the main 
menu. 
MENU
DGPS 3D
CHART SETUP OPTIONS
GPS/DGPS/TD OPTIONS
DISPLAY OPTIONS
CONFIGURATION
 
Main menu 
2.  Press the CHART SETUP OPTIONS soft 
key to open the CHART SETUP 
OPTIONS menu. 
CHART
    SETUP
DGPS 3D
CHART OFFSET
CHART DETAILS
TRACK CONTROL
RETURN
 
Chart setup menu 
3.  Press the TRACK CONTROL soft key to 
open the TRACK CONTROL menu. 
DGPS 3D
TRACK
CONTROL
DISPLAY TRACK   ON
TRACK COLOR     WHITE
PLOT 
                 TIME
TIME INTERVAL    01m00s
DIST INTERVAL     00.10 nm
TRACK MEMORY   2000 POINTS
 (MARK MEMORY) (3000) POINTS
             
      TRACK :  1000 / 2000 PTS used
      MARK   :        5 / 3000 PTS used
EDIT
ERASE
 T & M
RETURN
TRACKING
TRACK STATUS
STOP
TRACK
 
Track control menu 
4. Press 
 to select DISPLAY TRACK. 
5.  Press the EDIT soft key to show the 
display track window. 
6. Press 
 or 
 to select ON or OFF as 
appropriate. 
7.  Press the ENTER soft key or the 
[ENTER] key.   
8.  Press the [PLOT] key to close the menu. 
 
The default setting is ON, which traces ship’s 
track in accordance with ship’s movements. 
 
Number of track and mark points used 
appears in the TRACK STATUS window on 
the TRACK CONTROL display. Using the 
illustration at the bottom of the page as an 
example, it shows that 1000 out of 2000 
track points and 5 out of 3000 mark shave 
been used. 
 
3.2 Stopping/Restarting 
Plotting of Track 
When your boat is at anchor or returning to 
port you probably won’t need to record its 
track. You can stop recording the track, to 
conserve the track memory, as follows: 
 
1.  Press the [MENU] key followed by the 
CHART SETUP OPTIONS and TRACK 
CONTROL soft key. 
2.  Press the STOP TRACK soft key. The 
indication “TRACKING” in the TRACK 
STATUS window changes to “NOT 
TRACKING”. 
On the plotter display, H icon appears. 
 
To restart recording the track, press the 
START TRACK soft key at step 2 in the 
above procedure.