TOA a-9060dh Mode D'Emploi
38
I N 1
– I N 1
O N
0 0
I N 1 –
_ _ _ _ _ _ _
D U C K E R
O F F
(For the channel
on which the D-001T is used)
on which the D-001T is used)
Pre-paging tone ON/OFF setting
Operation mode setting
(For the channel
on which the ZP-001T is used)
on which the ZP-001T is used)
.
:
D U C K E R
P R I O R I T Y
1
(When the ducker function is set to ON)
Ducker priority level setting
D U C K E R
D E P T H
O F F
(When the ducker function is set to ON)
Ducker depth setting
Ducker depth setting
I N 1 – P H A N T O M –
O F F
Phantom power ON/OFF setting
I N 1 – N O M –
O F F
I N 1 – S E N S I T I V I T Y
– 1 0
Input sensitivity setting
B A S S
+ 1 2
T R E B L E
– 1 0
L O U D N E S S –
O N
EQ ON/OFF, Band number, Gain, Q,
and Center frequency settings
and Center frequency settings
HPF and LPF settings
C O M P R E S S O R –
O F F
E Q
1 0
+ 1 2
0 7
3 1 5
.
.
H P F –
4 0 0
H Z
L P F –
1 2 5
.
I N 1 – G A T E –
O N
G A T E – T H R E S H O L D
– 3 0
(When the Gate ON/OFF setting is ON)
Gate threshold level setting
Gate threshold level setting
I N 1
O U T
1
0
* See the right page.
(For the channel
on which the AN-001T is used)
on which the AN-001T is used)
P R E P A G E T O N E –
O F F
M O D E =
P A G I N G
P O R T
Input channel name setting
(For the channel on which
the module other than the AN-001T is used)
the module other than the AN-001T is used)
To select,
INPUT SELECT
1 – 8
* For the channel on which the D-001T is used
To select,
or
10.3.1. Setting flow chart
The screen display examples shown below may differ from actual displays.
The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting contents
to be selected with the Parameter setting knob, input channel selection key or other designated keys.
The indications of the [ ], [ ], [
The on-screen indications shown in red here (actually shown by flashing cursors) are parameters or setting contents
to be selected with the Parameter setting knob, input channel selection key or other designated keys.
The indications of the [ ], [ ], [
], and [
] arrows represent that the screen is switched with the Screen shift key.
Unless otherwise specified, use the Parameter setting knob for each parameter selection.
10.3. Input Setting