TOA f-1522sc Mode D'Emploi

7

Mounting tab axis screw (2 places)

Mounting tab

Use an electric screwdriver to detach.

Screw cap

Caution
Be sure to set the screwdriver's torque for under 4 kgf·cm. 
Failure to do so may cause the Screw cap and the Mounting tab to fall off 
on the rear of ceiling panel. 

Rotate the 2 mounting tab axis screws counterclockwise. The mounting tabs rise as they turn, allowing the
speaker to be removed. 

Caution
When loosening the mounting tab axis screws, support the speaker by hand to prevent it from falling. 

Follow the procedure below when repainting the front grille: 

Step 1. Clean the front grille before painting. 

Wipe with a soft cloth dampened in a detergent. 

Caution: Do not use thinner or other volatile liquids to clean the grille. 

Step 2. Spray on a uniform, thin coat of paint. 

Cautions 
• Avoid painting with a roller or brush, as the grille mesh holes could become clogged with paint.
• Use appropriate spray paints for the front grille (grille and frame) materials. 

Grille: Rolled steel plate 
Frame: Fire-resistant ABS resin (acrylic paint) 

• Be sure to follow the directions indicated on the paint when painting. 

Step 3. After the paint has dried, apply another light coat. 

Caution
Repeating Step 2, apply two or more light coats of paint. 
Application of one thick coat of paint all at once may cause drips or unevenness to show up in the
painted finish, or clog the mesh holes.