TOA F-1300B Manuel D’Utilisation

10

Use the supplied joint bracket and speaker bracket.

Note
Speaker coverage angles can only be adjusted in the vertical direction (Max. 45º downward). 
Adjust the speaker's tilt angle within the shaded range shown below.

30º

15º

Joint bracket

Speaker 
bracket

0º (horizontal)

45º downward

b

a

45º

b

a

0° 

(horizontal)

4-ø6 mm

ø10 mm

25 mm

30 mm

(ø0.24’’ )

(ø0.39’’ )

(0.98’’

)

(1.18’’ )

Step 1. Mount the joint bracket to the ceiling surface. 

Note
Hardware used for mounting the joint bracket to the ceiling is
not supplied. 

Step 2. Attach the speaker bracket to the speaker's bottom using the

supplied screws.

Machine screw
M5 x 20 (with 
plain washer and
spring washer)

Fixing bolt M5 x 60

Speaker unit

Front panel logo*

Joint bracket

Fixed mounting screw hole 
(4 holes)

Anchor bolt mounting hole

Speaker bracket

Ceiling board

Anchor bolt

Joint bracket

Effective length

• Use an appropriate anchor bolt for supporting 
  the full weight of the speaker and for the size 
  of mounting hole in the joint bracket.

• Ensure that the effective length of the anchor 
  bolt is 20 mm (0.79’’ ) or less.
• When speaker rotation capability is not desired, 
  secure with the 4 fixed mounting screw holes.

A s   h o l e   s e a l s   a r e  
adhered over the holes, 
remove them using a 
p o i n t e d   t o o l   b e f o r e  
attaching the bracket.

The front panel logo is affixed to the mesh net using
double-faced tape. Peel off the logo carefully and
reaffix it in the proper orientation.