TOA pe-304 Manuel De Montage

Step 2. Pass the speaker cord through the supplied ceiling

cover, and cut the cord to the desired length.

Note: Strip the end of speaker cord as illustrated.

Step 3. Run the speaker's cable through the cable holes in the

mounting hanger, then connect it to the input
connector.

Step 4. Put the mounting hanger onto the ceiling bracket's

hook.

Step 5. Connect both the lead-in and lead-out cables to the

input connector.

[Applicable cable]
• Solid wire:

ø0.8 – ø1.6 mm
(equivalent to AWG 20 – 14)

• Stranded wire (7-core): 0.75 – 1.25 mm

2

(equivalent to AWG 18 – 16)

Step 6. Push the ceiling cover, slipped over the cord in Step 2,

onto the ceiling surface, then tighten the cover-retaining
nut using a 17 mm (0.67") hex wrench. 
In the case of exposed wiring, notch the cable entry tab
on the rim of the cover, then make connections.

Ceiling cover (accessory)

Cover-retaining nut

Tightens

Loosens

9 mm

(0.35")

Speaker cord 5 m (16.4 ft)

Mounting hanger 
(accessory)

Input connector

HOT (black)

COM (white)

Ceiling bracket 
(accessory)

Mounting hanger
(accessory)

Ceiling

Lead-in and 
lead-out cables

To the next 
speaker

Input connector

From the 
amplifier

Ceiling

9 mm

(0.35”)

Ceiling cover

Notch this thin tab. 
(another tab is on the opposite side.)

Ceiling

Ceiling cover

Cover-retaining nut

Tightens

Loosens