Avaya P550 Manuel D’Utilisation
Configuring IP Routing (Layer 3)
7-2
Cajun P550/P220 Switch Operation Guide
Creating an IP Interface
By creating an IP interface, you activate a location in the switch that communicates
between the Internet Protocol (IP) and the embedded software of the switch.
between the Internet Protocol (IP) and the embedded software of the switch.
To create an IP interface:
1. In the IP Configuration section of the Web Agent window, click Interfaces. The
IP Interfaces dialog box opens.
2. Click CREATE. The Add IP Interface dialog box opens.
3. Use Table 7-1 to configure the IP interface:
Table 7-1. Add IP Interface Parameters
Parameter
Allows you to...
Interface
Enter a unique, alphanumeric name for the interface.
Admin. State
Specify the administrative state of the interface. Options
include:
include:
• UP - The interface is active.
• DOWN - The interface is inactive.
VLAN
Specify the type of VLAN. Options include:
• Default - Selects the default VLAN.
• Discard - Selects the VLAN to be discarded.
• Ethernet-Console - Selects the Ethernet Console port
as the VLAN.
• Serial Console - Selects the Serial Console port as the
VLAN.
Note:
The way that you configure a VLAN to a
port determines the IP Routing option that you
select for the interface. Use the following options to
configure the appropriate interface:
select for the interface. Use the following options to
configure the appropriate interface:
• If you select to create an IP interface for an
Ethernet-Console VLAN, select Mgmt Only from the
IP Routing pull-down menu.
IP Routing pull-down menu.
• If you select to create an IP interface for a
serial-console VLAN, select Mgmt Only from the IP
Routing pull-down menu.
Routing pull-down menu.
• If you create an IP interface for an inbound VLAN,
select Routing Mgmt from the IP Routing pull-down
menu.
menu.
Network Address
Enter the network IP address for the selected interface.
Mask
Enter the subnet mask for the interface.