Avaya P550 Manuel D’Utilisation

Monitoring and Configuring the Forwarding Cache (Layer 3)

Cajun P550/P220 Switch Operation Guide

11-5

3. Use Table 11-4 to determine the parameters you use in your search:

Displaying the Forwarding Cache

To display the forwarding cache information:

1. In the L3 Forwarding Cache section of the Web Agent window, click

Forwarding Cache. The FE Cache dialog box opens.

2. To modify your FE Cache table, perform one of the following:

•

To delete one or more entries, select the entry and click Flush Entry.

•

To flush (clear) the entire table, click Flush Table.

•

To refresh the contents of the table, click REFRESH.

Table 11-4. Route Cache Entry Search Parameters

Parameter

Allows you to search for all entries...

Destination Address

Within the routing cache that match the specified destination
address (IP address).

Source Address

Within the routing cache that match the specified source
address (IP address).

Protocol

By protocol identifier. By default, this field is 0 for IP (for
example, not supported by IP).

Destination Port

Within the routing cache that match the specified destination
port (IPU, IPM, IPX).

Source Port

Within the routing cache that match the specified source port
(IPU, IPM, IPX).

Comparison Value

Within the routing cache that match the specified comparison
value (TCP/UDP). Values include:

• DA - Destination address

• DASA - Destination and source address

• DAPROT - Destination address and protocol

• DADP - Destination address and destination port number

• DASAPROT - Destination and source address and

protocol

• DASADPSP - Destination and source address, and the

corresponding destination and source port numbers

VLAN

Within the routing cache that match the specified VLAN name.

Rule Number

Within the routing cache that matches the specified rule
number associated with an access list.

PRE

That match the PRE that is associated with the fabric port ID.