Avaya p120 Mode D'Emploi
Chapter 6
33
Cajun P120 Manager User Guide
Configuring IP Multicast Filtering
To configure IP Multicast Filtering:
Click .
Or
Select
Actions >
IP Multicast Filtering
. The IP Multicast Filtering
dialog box opens.
Figure 6-1. IP Multicast Filtering Dialog Box
The IP Multicast Filtering dialog box enables you to configure IP Multicast
filtering parameters on the Cajun P120 Device. It contains the following
parameters:
filtering parameters on the Cajun P120 Device. It contains the following
parameters:
Table 6-1. IP Multicast Filtering Parameters
Parameter
Description
Filtering Mode
The mode of operation of IP Multicast Filtering
on the device. Possible modes are:
on the device. Possible modes are:
• enable - IP Multicast Filtering is enabled
on the device.
• disable - IP Multicast Filtering is not
enabled on the device.
Host Aging Time
The amount of time (in seconds) allowed to pass
from a host’s last IP Multicast request before the
device stops forwarding a multicast session to a
host. The valid range for this parameter is
30 - 1800 seconds.
from a host’s last IP Multicast request before the
device stops forwarding a multicast session to a
host. The valid range for this parameter is
30 - 1800 seconds.