Avaya a500 Mode D'Emploi
tftp Commands
12-2
Cajun A500 ATM Switch User Guide
tftp get
Purpose
The
tftp get
command transfers a specified file over the network from the TFTP server
to the Cajun A500.
Syntax
tftp get {
file_name
} {
destination
} {
IP_address_of_tftp_server
}
Arguments
This command requires the following argument(s):
Example
A500: tftp get SWP_IMAGE.IMG PCMCIA:SWP_IMAGE.IMG 192.3.11.129
Attempting to TFTP file from host 192.3.11.129
Source: SWP_IMAGE.IMG
Destination: PCMCIA:SWP_IMAGE.IMG
Starting
Server located.
Bytes received: 1062811
Done.
File 'SWP_IMAGE.IMG' - 1062811 bytes - received.
file_name
Specify the name of the file you want to TFTP.
destination
Enter the location where you want to place this file. Possible
values are MAIN:{ file_name }, FLASH1:{ file_name },
FLASH2:{ file_name }, or PCMCIA:{ file_name }.
The value MAIN refers to the manifest section of the file
The value MAIN refers to the manifest section of the file
system (this section contains the Cajun A500 configuration
files).
IP_address_of_tftp_server
Enter the IP address of the TFTP server. Typically, the default
IP address is the correct one, and you only need to press
Return.