Avaya a500 Mode D'Emploi

Configuring the Cajun A500 Network

3-8

Cajun A500 ATM Switch User Guide

Deleting Virtual Channels or Paths

Note:  Virtual Circuits and Virtual Paths that are reserved for signaling cannot be 

deleted.

To delete a virtual channel or path:

1. In the ATM Switch 500 section of the Web Agent window, select Virtual 

Circuits. 

2. Select VC Table. The Virtual Circuits Table For All ATM Ports window opens.

3. Click Delete 

. The information appears for the channel you deleted.

CAUTION: If you accidentally delete the wrong Virtual Circuit/Virtual Path, 

follow the steps in the "Adding Virtual Channels or Paths" section to 

replace the VC/VP.

To delete a PVC using the CLI:

1. In the ATM Switch A500 section of the Web Agent window, select CLI. A shell 

window opens.

2. Execute the 

modify rem_channel

 command from the console. For more 

information on this commands, see Chapter 8, "modify Commands".

Note:  You use the same command when removing a point-to-point connection or a 

leaf from a point-to-multipoint connection. 

Note:  When tearing down a point-to-multipoint connection, each leaf must be 

removed individually. There is no single command to tear down both the root 

and leaves of a point-to-multipoint connection.