Avaya a500 Mode D'Emploi

Configuring the Cajun A500 Network

Cajun A500 ATM Switch User Guide

3-11

Adding Static IP Clients and Servers

The Web Agent enables you to configure your static IP clients and server. To configure

static IP clients and servers:

1. In the ATM Switch A500 section of the Web Agent window, select Services, then

select Static IP. The Static IP Status window opens with the Status and Mode

information.

2. Select Clients. At the Static IP Clients window, you can add a client by entering

the IP, MAC, and ATM addresses.

3. Click Apply to save your changes, or Cancel to restore previous settings.

4. Select Server. At the Static IP Server window, enter the ATM address for the

server.

5. Click Apply to save your changes, or Cancel to restore previous settings.

To configure static IP clients and servers, using the CLI:

1. In the ATM Switch A500 section of the Web Agent window, select CLI. A shell

window opens.

2. Execute the

admin static_ip add_client

and the

admin static_ip

set_server

commands. For more information on these commands, see Chapter 6,

"admin Commands".

Configuring Private Network-to-Network Interface (PNNI)

To configure PNNI:

1. In the ATM Switch 500 section of the Web Agent window, select PNNI.
2. Select Configuration. The PNNI Configuration window opens.

3. Enter the PNNI Level.

4. Click Apply to save your changes, or Cancel to restore previous settings.

To configure PNNI, from the CLI:

1. In the ATM Switch A500 section of the Web Agent window, select CLI. A shell

window opens.

2. Execute the

admin pnnilevel

command. For more information on this command,