Avaya a500 Mode D'Emploi
Configuring the Cajun A500 Network
3-14
Cajun A500 ATM Switch User Guide
Setting Up SNMP Communities
To set SNMP communities:
1. In the System section of the Web Agent window, select SNMP. The SNMP
window opens.
2. In the READ Community String field, enter a community name. This string
serves as a password that you enter at the network management station. It
provides the read level of access to the switch.
3. In the WRITE Community String field, enter a community name. This string
serves as a password that you enter at the network management station. It
provides the write level of access to the switch.
4. In the TRAP Community String field, enter a community name. This string
serves as a password that you enter at the network management station. It
provides the read trap level of access to the switch.
5. In the TRAP Destination field, enter an IP Address to send traps to the selected
IP address.
6. Click Apply to save your changes, or Cancel to restore previous settings.
Configuring Clock Synchronization
To configure clock synchronization:
1. In the ATM Switch A500 section of the Web Agent window, select Clock Sync.
The Sync Card Status/Configuration window opens.
2. Enter the appropriate information for the State, External Reference Type, DS1
Framing Type, Wait Time to Restore (sec).
3. Enter the Port and Priority information for the OC-N/SDH Port and External
Port.
4. Click Apply to save your changes, or Cancel to restore previous settings.
To configure clock sync, using the CLI:
1. In the ATM Switch A500 section of the Web Agent window, select CLI. A shell
window opens.
2. Execute the
sync setsync
command. For more information on these commands,
see Chapter 7, "sync Commands".