Avaya p120 Guide De Référence
Chapter 6
Legacy CLI (Command Line Interface)
Cajun P120 User’s Guide
39
Saving and Exiting
After changing all the necessary parameters using the CLI, use the
write
command to save your system configuration. If you receive any error messages,
your configuration has not been saved. You must correct the errors and re-issue the
your configuration has not been saved. You must correct the errors and re-issue the
write
command.
Notification of write errors is presented in a two column display:
•
The left column contains the parameter values that you set in this session and
need to be changed.
need to be changed.
•
The right column contains the parameter values currently saved in the
Cajun P120.
Cajun P120.
Wait 15 seconds for confirmation of the write process. Then exit Privileged level by
typing
typing
exit
at the prompt. For example,
CajunP120-priv#
exit
.
The cursor changes to
CajunP120>
to indicate that you are in Normal level.
Verify that all the parameters were accurately saved by using the
show all
or
show all list
command.
The Cajun P120 is now ready for cabling and operation. You may exit your CLI
session.
session.
Normal Level Commands
The following is a list of commands that can be used in the Command Line
Interface (CLI).
Interface (CLI).
Table 6.1
Normal Level Commands
Command Syntax
Function
flogin
Breaks the current SNMP session and forcibly
enters the Privileged level.
enters the Privileged level.
getmib <object_ID>
Gets a MIB value.
getnextmib <object_ID>
Gets the next MIB value
help
Displays a list of the commands.
login
Enters the Privileged password level. (You
cannot enter this level when an SNMP session
is active. See also flogin.)
cannot enter this level when an SNMP session
is active. See also flogin.)
native
Changes CLI to native mode
partition
Enables/Disables partition on all HD ports