Avaya P550 Guide De Référence
`~àìå=mRRMLmUUM=pïáíÅÜ=^qj=`if=réäáåâ=oÉÑÉêÉåÅÉ=dìáÇÉI=sÉêëáçå=NKN==
`~àìå=^qj=réäáåâ=`if=`çãã~åÇë
==============NJON
ëÉí=åÉíïçêâ=éêÉÑáñ=
`çãã~åÇ=jçÇÉ
Configuration
aÉëÅêáéíáçå
Set the address prefix of an ATM network.
* Note: You must disable a network each time you make a
change to the configuration. After you make
configuration changes, you must enable the network in
order for the changes to take effect.
configuration changes, you must enable the network in
order for the changes to take effect.
póåí~ñ
set network prefix <atm-prefix>
q~ÄäÉ=NJNTK==m~ê~ãÉíÉêëI=hÉóïçêÇëI=^êÖìãÉåíë
p~ãéäÉ=lìíéìí
This example sets the ATM address prefix.
ATM(configure)# set network disable
Network has been disabled
ATM(configure)# set network prefix
3900000000000000000000aa03
ATM Address Prefix set successfully
ATM(configure)# set network enable
Network has been enabled
Name
Definition
atm-prefix
Sets the prefix portion of the uplink’s ATM
address.
address.
kçíÉW===
The prefix must be a 13-byte number.
The first byte must be a valid Authority
and Format Identifier (AFIs 0x39, 0x47,
and 0x45) for Network Service Access
Point (NSAP) addressing as defined by
the UNI (User-to-Network Interface)
signaling specification.
and Format Identifier (AFIs 0x39, 0x47,
and 0x45) for Network Service Access
Point (NSAP) addressing as defined by
the UNI (User-to-Network Interface)
signaling specification.