Avaya 2410 Mode D'Emploi

The following features are available only if your system manager has 
administered them as feature buttons on your 2410 telephone.

The Call Timer and the Timer features are used to measure elapsed time on 
a call. 

The Call Timer feature, once activated, measures elapsed time 
automatically on all calls until you turn off the Call Timer feature.

The Timer feature, which you turn on and off manually, allows you to 
determine which calls you want to time on an individual basis. 

Check with your system manager to see if you can use either of these 
features.

1. Press the 

 button (if administered).

2. When you want to turn off the Call Timer feature, press the 

 

button again.

1. Press the 

 button (if administered).

2. To stop the timer and clear the display, press 

 again. The 

elapsed time is displayed for three seconds.

The Directory feature allows you to search for the extension of another user 
in your call processing system directory by keying in the user’s name at the 
dial pad.

1. Press the 

 button (if administered).

2. Key in the selected name with dial pad keys:

 

last name, comma (use 

), first name or initial.

3. Press the 

 button for each successive directory name you wish 

to see. (The 

 button must be administered by your system 

manager.)

4. To search for a new name, press the 

 button and go through 

the above sequence again.

5. When you are ready to exit the directory, press 

.