Avaya 4621SW Mode D'Emploi

You require the following items to install your Quick Edition IP Telephone. These items are 
shipped with the Quick Edition IP Telephone. Verify that the Quick Edition IP Telephone 
package includes the following items:

●

one Telephone set (includes a telephone stand),

●

one Category 5 (Cat5) modular line cord, for connecting the Telephone to an Ethernet LAN 
or a PC, and

●

the Avaya one-X Quick Edition Telephone Quick Installation Guide.

 and 

 for two possible ways to assemble and connect a 4621 SW IP 

Telephone. 

 show two possible ways to assemble and connect a 4610 SW 

IP Telephone. Choose the assembly that is best for your situation. 

Power is typically supplied to the Telephone by connecting the Cat5 modular line cord to a 
802.3af PoE-enabled Ethernet LAN. Option A, shown in 

, shows a 

wall-jack connection, but you could connect the Cat5 modular line cord directly to a 
PoE-enabled Ethernet switch. If your Ethernet network does not provide 802.3af-compliant 
inline power, you must supply a PoE inline power supply such as the Avaya Model 1151B1 (see 
Option B shown in 

). 

CAUTION:

The last step in installing the Quick Edition IP Telephone must be applying power.

You may optionally connect the Telephone between a computer and the Ethernet LAN—the 
Telephone and the computer share the connection. In this case, you must supply a second Cat5 
(or better) modular line cord to connect the Telephone to the computer. For more information, 
see 

Note:

To assemble and adjust the telephone stand, or wall-mount the Telephone if 
required, see the Avaya one-X Quick Edition Telephone Quick Installation Guide.