Avaya 4624 Mode D'Emploi
5-18
Issue 1 July 2001
5. Press the softkey below the feature you want to place on (or remove from)
an available Feature button, for example, SAC to add or remove send all
calls. Selecting certain features may prompt you to enter a number such as
a telephone number, extension or trunk code to be associated with the
button you select in the next step.
calls. Selecting certain features may prompt you to enter a number such as
a telephone number, extension or trunk code to be associated with the
button you select in the next step.
NOTE:
Some already-programmed features, for example, call appearances, cannot
be changed from your phone; if you attempt to change one of these
features, your phone beeps once and the message "Press button to
program" remains displayed.
be changed from your phone; if you attempt to change one of these
features, your phone beeps once and the message "Press button to
program" remains displayed.
6. Press the Line/Feature button you want to assign to the selected feature.
If the feature is successfully administered, the display shows "Button
Programmed." If the button pressed already has a feature associated with
it, the display shows the programmed feature description and provides you
with the option of keeping it as programmed or replacing it with the
selection made in Step 6.
Programmed." If the button pressed already has a feature associated with
it, the display shows the programmed feature description and provides you
with the option of keeping it as programmed or replacing it with the
selection made in Step 6.
7. Choose one of the following options:
If you want to
Then
Program
another button
after receiving
the "Button
Programmed"
message
another button
after receiving
the "Button
Programmed"
message
Press the softkey below Cont (Continue) on the
second line of the display. Repeat this procedure
from Step 4.
second line of the display. Repeat this procedure
from Step 4.
Replace the
feature shown
feature shown
Press the softkey below Replace.
The display reverts to the first Select Feature menu.
Keep the
feature as
programmed
feature as
programmed
Press the softkey below Keep.
The display confirms the button has not been
reprogrammed.
reprogrammed.
Delete the
feature from
the button
selected in
Step 6 and
leave it blank
feature from
the button
selected in
Step 6 and
leave it blank
Press the softkey below Delete.
The message "Button Programmed" displays.
Exit the
self-adminis-
tration function
self-adminis-
tration function
Press Exit to return to the default (date/time) display
and normal call-handling mode.
and normal call-handling mode.