Avaya 9630 Mode D'Emploi
Overview
1-2
Issue 1 May 1999
status of the following: message waiting, signal strength, lock, vibrator, battery,
silent, mute, and next.
silent, mute, and next.
The 9630 Series WT contains the following hard keys (buttons) on the keypad:
On/Off, Redial, Menu, Next, Silent, Conf, Trans, and Hold; it also contains a Mute
button and two volume control buttons on the side. In addition, the WT contains a
dial pad and four soft key buttons.
On/Off, Redial, Menu, Next, Silent, Conf, Trans, and Hold; it also contains a Mute
button and two volume control buttons on the side. In addition, the WT contains a
dial pad and four soft key buttons.
The 9630 Series WT is not physically connected by a cord to the DEFINITY ECS
or any other DWBS component. Instead, the WT is wireless and communicates
via a radio link to a network of Wireless Fixed Bases (WFBs), which in turn
connect the WT to the DEFINITY ECS. The 9630 Series WT is designed to be
compatible with existing and future releases of the DWBS.
or any other DWBS component. Instead, the WT is wireless and communicates
via a radio link to a network of Wireless Fixed Bases (WFBs), which in turn
connect the WT to the DEFINITY ECS. The 9630 Series WT is designed to be
compatible with existing and future releases of the DWBS.
NOTE:
The following figure shows the 9630 Series WT. Chapter 3 of this guide
describes the 9630 Series WT in detail and contains instructions on how to
use the WT.
describes the 9630 Series WT in detail and contains instructions on how to
use the WT.