Avaya 6211 Manuel D’Utilisation
ffffffffffffffffffffffffffffffffffffff
If you are viewing the options, press
#
to continue stepping through the display of all the
options. Press
*
to quit once you have viewed the options. (When viewing the options, the
currently active values are displayed.)
If you are changing options, press
*
to change the currently displayed option value until the
desired value is displayed, press
#
to save the value. Press
0
to skip to the next option
without making a change. (When changing the options, the values displayed are the power-
up values. These values may not be the same as the currently active values.)
up values. These values may not be the same as the currently active values.)
After you have made your last selection, the ISDN set stores and activates your selections and
automatically exits the program mode.
automatically exits the program mode.
Setting Options on the 7505 (Without Display)
If you have an ISDN set without a display, follow the instructions below.
Note:
The handset must be in the cradle and the internal speakerphone/loudspeaker or
attached speakerphone must be off to set options from the keypad.
attached speakerphone must be off to set options from the keypad.
1
Press the
Select
button. The green lamp comes on.
Note:
This button may be labeled
Shift/Select
on older sets.
2
Press the
DATA/SEND/OFF
button. No additional lamps come on.
3
Select your desired data mode setting.
Press
1
for B2. (B-channel: Mode 2 -- default setting)
Press
2
for BA. (B-channel: Mode 3/2 Adaptive)
Press
3
for DX25. (D-channel: X.25 Packet Switching)
Press
4
for BV64U (B-channel: V.120 @ 64 Kbps without error correction)
Press
5
for BV64I (B-channel: V.120 @ 64 Kbps: with error correction)
Press
6
for BV56U (B-channel: V.120 @ 56 Kbps: without error correction)
Press
7
for BV56I (B-channel: V.120 @ 56 Kbps: with error correction)
You hear a rising two-tone confirmation.
4
Select your desired data rate setting.
Press
2
for 1200 bps.
Press
3
for 2400 bps.
Press
4
for 4800 bps.
Press
5
for 9600 bps. (default setting)
Press
6
for 19,200 bps.
Press
7
for 38,400 bps.
Press
8
for 57,600 bps.
You hear a rising two-tone confirmation.
5
Select your desired parity setting.
Press
1
for space. (default setting)
Press
2
for mark.
Press
3
for even.
2-4
Chapter 2