Avaya 6211 Mode D'Emploi
MDF/lDF DESIGN: SYSTEM 85 AND DEFINITY GENERIC 2 WITH TRADITIONAL MODULES
2-33
Figure 2-18. Example of Label Filled In
The label sheets are stocked at the AT&T Customer Information Center and can be obtained by calling
(800) 432-6600 or by writing to:
AT&T Customer Information Center
P.0. Box 19901
Indianapolis, Indiana 46219
P.0. Box 19901
Indianapolis, Indiana 46219
Include the following information when ordering:
●
Name and address
●
Geographic location number (such as CO8100)
●
Organization number (such as 20052119)
●
Account code (such as 123-4567)
●
Select code of sheets needed (upper righthand corner of each sheet)
●
Number of sheets needed
CUSTOMER PARTICIPATION
Customer partcipation in wiring administration allows the customer to set up, tear down, and alter
cross-connections on the building distribution field of the MDF and on the IDFs. Because 110A cross-
connect hardware is used with jumper wires and require the use of a punchdown tool to make cross-
connections, customers who wish to handle their own wiring administration can have their technician
instructed on the use of a punchdown tool and connecting and disconnecting jumper wires.
cross-connections on the building distribution field of the MDF and on the IDFs. Because 110A cross-
connect hardware is used with jumper wires and require the use of a punchdown tool to make cross-
connections, customers who wish to handle their own wiring administration can have their technician
instructed on the use of a punchdown tool and connecting and disconnecting jumper wires.