Avaya 6211 Mode D'Emploi
Chapter 5: Call Control Operation
DEFINITY
Communications System
DEFINITY High Speed Link
Page 5-4
User´s Guide
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
ENDING A CALL
Calls can be disconnected using the front panel, the V.35 interface,
or the RS-232 interface. A call cannot be disconnected when the
Permanent Connection option is set to YES or when the HSL is in
a test mode activated by the switch.
or the RS-232 interface. A call cannot be disconnected when the
Permanent Connection option is set to YES or when the HSL is in
a test mode activated by the switch.
ffffffffffffffffffffffffffffffffffffffffffff
Front Panel
Procedure: Ending a call from the front panel
1
Press
NEXT/NO
until the HSL displays
CALL CONTROL?
2
Press
ENTER/YES
. If there is a call in progress, the HSL
displays
END CALL?
3
Press
ENTER/YES
when the HSL displays
END CALL?
ffffffffffffffffffffffffffffffffffffffffffff
V.35 DTR Lead
With the DTR lead option set to NORMAL, the data equipment
turns OFF the V.35 DTR lead.
turns OFF the V.35 DTR lead.
ffffffffffffffffffffffffffffffffffffffffffff
RS-232
The user sends an ATH command to end the call.