Avaya 8434 Mode D'Emploi
Test
✔
To test the lights and the
display on your voice
terminal
display on your voice
terminal
•
1 While on-hook or off-hook, press and hold [
Test
]
•
Green light next to [
Test
] goes on
Note: If the green light next to [
Test
] flashes
rather than goes on steadily, it means the voice
terminal is not communicating with the PBX. In
such a case, see your system manager.
terminal is not communicating with the PBX. In
such a case, see your system manager.
The lights go on steadily in four groups, and the
display fills in all the segments
display fills in all the segments
2 To end test, release [
Test
]
•
Lights return to pretest state; green light next to
[
[
Test
] goes off
Note: If the display or the lights do not respond
during test, notify your system manager.
during test, notify your system manager.
Transfer
To send present call to
another extension or
outside number
another extension or
outside number
✔
1
Press [
Transfer
]
[dial tone]
•
•
Present call is put on hold and green light next to
the held call flutters
the held call flutters
You are given a new call appearance
2
Dial number that call is to be transferred to
[ringback tone]
•
Remain on line and announce call; if no answer or
busy, return to held call by pressing its [
busy, return to held call by pressing its [
xxxxx
]
3
4
Press [
Transfer
] again
Call is sent to dialed number
•
Hang up
36