Manualsbrain.com
  1. Manuels
  2. Marques
  3. Avaya
  4. callmaster ii
  5. Guide De Référence

Avaya callmaster ii Guide De Référence

Télécharger
Page de 8
ENABLING OR DISABLING THE RECORD OUT SIGNAL
To enable or disable the Record Out Signal
1    While on-hook (the headset must be unplugged), press [ 
Select
 ].
●
The light next to [ 
Select
 ] goes on.
2    Press [ 
Mute
 ].
●
The CALLMASTER set is in option programming mode.
3    Dial the 2-digit code, "73" ("RE").
●
The current setting (Enabled or Disabled) is shown on the
display.
4    Dial [ 
*
 ] to change the setting.
5    When the setting you prefer is shown on the display, press [ 
#
 ] to
save it and exit programming mode.
NOTE: No recorder warning tones will be produced when the Record
Out Signal is disabled.
ENABLING OR DISABLING THE RECORDER WARNING TONE
To enable or disable the warning tone on the recorder interface
1    While on-hook (the headset must be unplugged), press [ 
Select
 ].
●
The light next to [ 
Select
 ] goes on.
2    Press [ 
Mute
 ].
●
The CALLMASTER set is in option programming mode.
3    Dial the 2-digit code, "78"  ("RT").
●
The current setting (Enabled or Disabled) is shown on the
display.
4     Dial [ 
*
 ] to change the setting.
4