Avaya 10bs Instruction De Maintenance

3

-

Dial tone (steady)

You can make a call.

Busy (slow repeating tone)

The phone you are calling is busy.

Fast busy (fast repeating tone)

No lines are available.

Error (alternating high-low tones) You dialed a number or used a feature incorrectly.
Confirmation (double break in

You used a feature correctly.

dial tone followed by steady tone)
Callback (5 short beeps)

This call is receiving Callback treatment
(see p. 17).

Call Waiting (1 or 2 beeps)

You have an inside (1 beep) or an outside
(2 beeps) call waiting (see p. 18).

◆ ◆

The table below helps you identify the different types of ringing. You can also personalize ringing at
your telephone or adjust ring timing for the line buttons where calls arrive. Programming Buttons
& Settings, p. 23, tells you how to change the settings. Listed below are your options:

• Personalized Ring. Allows you to give calls ringing at your phone one of eight distinctive rings.
• Abbreviated Ring. When you are on a call and another call arrives at your phone, you can use

this feature to give the second call a short ring.

• Immediate Ring. Calls ring immediately on line buttons set this way.
• Delay Ring. This setting causes calls to ring at your phone after a delay. If your calls are being

covered, this allows time for another person to answer a call before you do.

• No Ring. Calls do not ring (except for returning transferred and Callback calls.) Calls on lines

1 long ring

Inside call

1 short ring and 1 long ring

Outside call

2  short rings and 1 long ring

Outside call transferred to you, returning transferred
call, or returning Callback call (see p. 17)

◆ ◆ ◆ ◆ ◆