Avaya 18d Mode D'Emploi

This feature turns on the message light at a specified extension.

■

■

■

■

■

■

This feature turns on the message light on system phones and standard
phones that have message lights. (See “Standard Telephones” in Chapter 1
for a list of standard phones that have message lights.) Any type of phone
can turn on or off a message light.

For message waiting capability, standard phones with message waiting
lights must be connected to an R3.1 206 module and the system must be
equipped with an R3.1 processor module.

On a standard phone, the message light flashes (only when the phone is
idle) to indicate that the extension has received a message.

Do not use this feature for an extension that is covered by the voice
messaging system. The voice messaging system automatically turns on the
message light at a subscriber’s extension when a message is left in the
mailbox.

If you use this feature to signal someone at a doorphone extension, you
must use Message Light Off to turn the light off.

You can program a Message Light On button on a system phone to turn on
the message light by pressing the button then dialing the extension number
of the phone whose light you want to turn on.

To program a Message Light On button:

1.

2.

3.

4.

5.

Press 

 

   

   

   

   

   

 .

Enter the number of the extension to be programmed with this feature.

Press a programmable button.

Press 

 

   

   

 .

Program another button for this extension or exit programming mode.

Message Light On (F09)