Avaya mlc-5 Manuel Complémentaire

Card used to note
feature or line assigned
to each line button.

Button used to change
channels for improved
reception.

Five buttons with red
lights, used to make/
receive calls. Any
unlabeled buttons can
be programmed with
features.

Light blinks when
batteries have less than

15 minutes of use

remaining (tone also
generated).

Light illuminates

when you have a voice-

mail message, fax, or a
message from the

Imprinted buttons, including dedicated

feature buttons, cannot be changed.

system operator.

Retractable antenna;
extend fully for clear

reception.

Metal contacts that

recharge the handset.
Clean contacts
periodically with a soft
pencil eraser.

Electronic display of

the channel currently

used or programmed.
A "P" displays when
the telephone is being

programmed.

Erasable card used to
record the telephone
number assigned to the
cordless telephone and
to list feature codes.

Light illuminates when

you have a voice-mail

message, fax, or
message from the
system operator.

●

●

●

Press to put a call on hold.
Red light flashes while call
is on hold. During hold,
phone beeps every 60
seconds. More than one
call can be on hold at a
time.

Press to show on the
status of the handset line
button lights, except for
On/Off, Low Battery,  and
Message.  Light turns
off after 20 seconds.

Press to send a call to
another phone.

Press to change the
channel to improve
reception.

Press to activate the
handset to make or
answer a call.

Charge - a light that

illuminates when the
handset is in the the base
unit and the batteries are
c h a r g i n g .

Talk - a light that

illuminates when the
handset is removed from

the base unit and, is turned
on using On/Off  button.

Program - a light that
illuminates when the T/P
switch is set to P for
programming.

Sliding control used to
adjust the volume of the

base unit’s ring.

Switch used to test and
program the telephone.