Avaya 2 Manuel D’Utilisation

SoundStation2 Avaya Administrator Guide - 30

MIC 1

MIC 3

MIC 2

MIC 4

MIC 5

You may test the SoundStation2 Avaya’s 
microphones to ensure that they are 
working optimally.

You can select an acoustic test signal to drive through the 
SoundStation2 Avaya’s speaker for speaker testing and to 
sample the room acoustics.

1.  Press the Menu button 

 , 

choose Admin Setup and press 
the Select button 

, enter 

passcode (if required) and press 
the 

 soft key.  Choose 

Diagnostics using the Scroll-
ing buttons 

 , and press the 

Select button 

.

2.  Choose Mic Test using the 

Scrolling buttons 

 , and press 

the Select button 

.  The 

microphones are numbered ac-
cording to the diagram.

3.  Choose  any microphone using 

the Scrolling buttons 

 , and 

press the Select button 

. 

 

►The testing microphone will 

begin sampling at a 1 Hertz rate, 
50% duty cycle.

 

►The display will show a meter 

that modulates according to the 
relative sample received by the 
testing microphone.

1.  Press the Menu button 

 , 

choose Admin Setup and press the 
Select button 

, enter passcode 

(if required) and press the 

 

soft key.  Choose Diagnostics using 
the Scrolling buttons

, and press 

the Select button 

.

2.  Choose  Console Speaker Test 

using the Scrolling buttons

 

and press the Select button 

.  

Choose the desired signal using the 
Scrolling buttons 

 

 

►Sine Sweep is a test signal 

consisting of a 100 Hertz to 
3,500 Hertz sine wave whose 
frequency is swept according to 
a linear progression of fre-
quency as a function of time, or 
(t)=A*sin(kt).

 

►One kiloHertz Tone is a con-

stant tone generated at exactly 
1,000 Hertz.

 

►White Noise is a signal whose 

energy is distributed uniformly 

MIC 3 LEVEL METER

CANCEL