Avaya 1224 Mode D'Emploi

Resetting the Clock for

adjust the SPIRIT Attendant’s clock by one hour (for daylight saving time),

Daylight Saving Time

use the following instructions.

1. Select an outside line and dial a telephone number that is answered by your

SPIRIT Attendant.

2. Wait for an answer.

3. Dial ✳ followed immediately by your authorized caller code and #.

The two-beep confirmation tone sounds.

4. Dial ✳ 72.

5. Perform the appropriate procedure:

— Dial 1 to add one hour to the current time (normally used in the spring to

begin daylight saving time).

— Dial 2 to subtract one hour from the current time (normally used in the

fall to cancel daylight saving time).

The two-beep confirmation tone sounds.

6. Continue programming or exit authorized caller mode by dialing ✳ #.

NOTE:

If you have more than one SPIRIT Attendant, you must follow
the procedures in this section to program every
SPIRIT Attendant identically. Number of rings to answer must
not be identical for all SPIRIT Attendants.

7. To disconnect, dial #.

Changing Your

Three types of recorded announcements are available with the SPIRIT Attendant:

Recorded Announcements

Day, Night, and Hold.

The total duration for all recorded announcements for the SPIRIT Attendant must

equal

64 seconds. Each recorded announcement has a maximum duration in

seconds as follows:

TABLE 2-2 Time Allocations for Recorded Announcements.

Duration

Announcement

(Seconds)

Day

Night

Hold

Total

Changing the Current Settings

2-7