Avaya 1224 Mode D'Emploi

You may need to change one or more of the current settings for the
SPIRIT Attendant if, for example, your business hours change or you need to

reset the clock for daylight saving time. Changes can be made from a SPIRIT

system telephone. Changes can also be made from a remote location using a
standard Touch-Tone telephone.

If you have more than one SPIRIT Attendant in your SPIRIT system, all their

settings must be exactly the same. You must change settings on all
SPIRIT Attendants whenevcr you change the settings on one.

The settings should be the same except for number of rings to answer.

When you program a feature correctly, you hear a two-beep confirmation tone.

You hear a three-beep error tone if you enter a command incorrectly.

All 

programming for the SPIRIT Attendant must be done via a Central Office call,

not an intercom connection.

If 

the C.O. lines on the SPIRIT controller are administered for pulse

dialing, you must press ✳ on your SPIRIT set to switch the controller
to touch tone after the SPIRIT Attendant answers the call.

All off-site programming must be done from a Touch-Tone phone. Procedures

for remote programming are the same as on-site programming procedures.

Changing the Current Settings