Epson DFX-9000 Mode D'Emploi

11. Turn on the printer if it is off. You hear the print head move to the left and 

Ready

 appears on the LCD. Either the front or rear 

Tractor Select

 arrow 

lights up to indicate the tractor that was selected last.

12. If the rear tractor arrow light is red, press the 

LF/FF Load

 button to load the 

paper.

If the front tractor arrow light is red, press the 

Front/Rear

 button to switch 

to the rear tractor. When the printer switches tractors, it loads the paper 
automatically.

The rear tractor arrow light turns green and the paper is loaded to the top-of-
form position. If you need to adjust the paper position, see “Adjusting the Paper 
Position” in your on-screen Reference Guide.

You can easily switch between paper loaded on the front and rear tractors, and 
vice-versa. Just wait for any print jobs to finish before switching tractors.

c

LF/FF Load

1.

Turn on the printer.

2.

If no paper is loaded in the front or rear tractor, load it as described on 
page 9 (front) or page 12 (rear).

3.

To tear off any printed pages or excess 
paper, press the 

Tear Off

 button and 

tear off the pages at the perforation.

c

Caution:
Always tear off the printed 
document and any excess paper 
before switching tractors. If the 
perforation does not align with the 
tear-off edge, you can adjust it. See 
“Adjusting the Tear-Off Position” 
in your on-screen Reference Guide.

4.

Press the 

Front/Rear

 button to switch 

to the other tractor. The selected 
tractor light turns green and the paper 
advances to the top-of-form position.

front

rear