Epson priorityfax 1000 Manuel D’Utilisation
4
Troubleshooting
Problems and
Solutions
Solutions
Sending
This chapter discusses problems you may encounter and their
likely solutions.
likely solutions.
This section includes four categories: sending, receiving, copying,
and telephoning.
and telephoning.
D ocum e nt jam .
Rush down on the cover release button to open up the fax
machine. Remove the jammed document. Rush the cover back
in place until you hear a click Make a copy of the jammed
document, and
machine. Remove the jammed document. Rush the cover back
in place until you hear a click Make a copy of the jammed
document, and
send
the copy.
D ocum e nt doe sn't e nte r the feeder prope rly.
The cover may not be closed securely. Push down on the cover
until you hear a click.
until you hear a click.
The document’s left edge is not aligned with the document
guide. Open the paper cover to remove the document and
guide. Open the paper cover to remove the document and
then push it closed until you hear a click. Align the document
with the document guide.
with the document guide.
The documents may be too thick or too thin. Use a copier other
than the fax machine to reproduce the original document. Then
send the copy.
The documents may be wrinkled, wet, curled, or tom. Use a
copier other than the fax machine to reproduce the document.
Then send the copy.
copier other than the fax machine to reproduce the document.
Then send the copy.
The documents may be too small. Use a copier other than the
fax machine to reproduce the original document. Then send the
copy.
fax machine to reproduce the original document. Then send the
copy.
Multi-page documents on bond paper may need to be fed one
page at a time.
page at a time.